Coding the Future

Using The Multiple Nics Of Your File Server Running Windows Server

using Nic Teaming With windows server 2016
using Nic Teaming With windows server 2016

Using Nic Teaming With Windows Server 2016 Throughout this blog post, we will look into different configurations for windows server 2008 (and 2008 r2) where a file server uses multiple nics. next, we’ll describe how the behavior of the smb client can help distribute the load for a file server with multiple nics. If you have multiple interfaces (and a spare one), you could put an ip on that interface on your windows host, and connect it directly to the switch. on the same subnet as the switch. make sure to not put a default gateway on that interface. the best way to do it, would have your router to route between the current network on your windows.

using The Multiple Nics Of Your File Server Running Windows Server
using The Multiple Nics Of Your File Server Running Windows Server

Using The Multiple Nics Of Your File Server Running Windows Server If your switch and nics support it, you can do bonding. what make model is the switch and the nics? if it's server class hardware, most of those can do it, using their drivers. read the documentation for the server nics and your switch that it plugs into. Thanks for your answers. my modem router (internet router) has an internal firewall (cisco). i’m not using windows server as a router. windows server runs a server application that works on the packages made available to us on remote customers sites, this application retrieves and prepares them for distribution to our employees to work on, currently we have to disconnect nic 1 (after. 3. having multiple nics in a server is crazy common for redundancy and increased bandwidth. i don't know of any tier 1 server hardware that doesn't have at least 2 nic ports exactly for this. in server 2012 and latter the os natively support bridging aggregating nics. in previous versions of windows you had to use the nic manufacturers custom. I am running windows server 2008 r2 server edition on a server that has 2 identical intel 1000mb network interfaces. is there any way to link these in order to improve network copy over lan? i noticed that when the server is running backup (copying files from its own storage to another network location) or i have multiple clients downloading.

Comments are closed.