35 Nice Garden Stepping Stone Design Ideas Diy Garden Path Stone Form the front of the step. set 6 x 8 in. wall stone into a 3 in. bed of sand to form the step. settle and level the stones with a rubber mallet or a hammer and block of wood. then fill behind the step stones with packed sand and set the stone walkway even with the top of the step. tmb studio tmb studio. step 7. Spaced out stones. create a simple yet distinctive path by placing random sized paving stones into the lawn. lay the stones out in the desired pattern, using a shovel to outline where the grass.
How To Make A Flat Stone Pathway At Frances Ross Blog Step 2: form the trench. when digging the trench, use the square edged spade to straighten the sides and make the bottom as even as possible. occasionally, check the depth of the trench with a tape measure as you go. next, smooth the bottom of the trench with a steel rake, then compact the soil with a hand tamper. Step 4: add crushed stone or coarse sand to the excavated areas. pour a 1 4 to 1 2 inch layer of crushed limestone or coarse sand on the bottom of the hole, packing it down and making it is as. Excavate the path. use a flat spade or sod cutter to slice through the grass along the path's edges, following the strings or garden hoses. remove all grass or other vegetation (including all roots) in the path area. dig out the soil to a depth of 5 inches (for 3 inch thick stone), creating a flat, smooth base. Flip each paver to the side of its outline, then strip out the sod. dig down along the edge to a depth equal to the stone’s thickness plus one and a half inches. repeat this process for each remaining stone. fully removing the grass and soil helps prevent weed growth around the stones.
Comments are closed.