Step By Step On How To Change A Flat Tire Mach 1 Services Step 4. lift the car with the carjack. after loosening the lug nuts on the flat tire, the next step in changing the tire is lifting the car off the ground. without jacking up the car, you won’t get enough clearance to be able to work the flat tire off the car and replace it with a fresh one. Squeeze a pea sized amount of tire sealing cement into the hole. prepare the plug: get your plug laid out, measure it against your hole to make sure that it will fit (you want a snug fit so the plug can do its job). push your plug through your insertion tool (from your plug kit), then coat with tire sealing cement.
Step By Step On How To Change A Flat Tire Mach 1 Services Jump to: step 1: park your car. step 2: find the tire changing tools your car came with. step 3: jack it up. step 4: remove the lug nuts. step 5: put the spare tire on. Then use your lug wrench to fully remove the nuts. after that, pop off the wheel, then slap the spare tire on, placing the wheel with the flat next to the jack where the spare used to be; safety. Turn the wrench a quarter or half turn counterclockwise to loosen the lug nuts. by starting to loosen the lug nuts before you jack up your car, the car's weight will hold the wheel stable so you aren't inadvertently moving the tire instead of loosening the lug nuts. 5. place the jack under the vehicle and raise it. Step 1: be prepared. you should know if your car has a spare tire or a “fix a flat” kit. a lot of new cars don’t come with a spare tire for various reasons, so check to make sure you have.
How Change Flat Tire Image Photo Free Trial Bigstock Turn the wrench a quarter or half turn counterclockwise to loosen the lug nuts. by starting to loosen the lug nuts before you jack up your car, the car's weight will hold the wheel stable so you aren't inadvertently moving the tire instead of loosening the lug nuts. 5. place the jack under the vehicle and raise it. Step 1: be prepared. you should know if your car has a spare tire or a “fix a flat” kit. a lot of new cars don’t come with a spare tire for various reasons, so check to make sure you have. Step 9: replace the tire. mount the new tire and screw in the lug nuts nicely and tight. secure the nuts in a star pattern to avoid problems with uneven tightening. step 10: lower the vehicle slowly. once the vehicle is lowered to the ground, double and triple check the tightness of the lug nuts. 5. remove the flat tire. with the car raised, finish loosening the lug nuts and place them in a convenient spot nearby. (think somewhere where they won't get in the way but where they won't get.
Comments are closed.