Part 4 Of 4 Porsche 996 Turbo Cooling System Pres This video demonstrates one of the ways that you can effectively pressure check and refill your cooling system. this technique is used on many different mak. 2. if the test pressure of step 1 is maintained, test step 2. apply excess pressure to the pressure relief valve of step 1 by pumping rapidly. the pressure relief valve of step 2 must open at an excess pressure of approx 26 psi. if the valve does not open, replace the cap.
The Ultimate Guide To Understanding The Porsche 996 Cooling System Step 3: pressure test. to pinpoint the exact location of the leak, perform a pressure test on the cooling system. use a pressure tester to pressurize the system, and observe where coolant begins to escape. step 4: repair or replace. hose replacement: if hoses are damaged or worn, replace them with new ones. 2005 997.1 c2s. i need to replace the crossover hose pipe to the radiators top one due to a leak in the connection to the hose on the left side of the car just replaced this hose, but still leaking i suspect it is the quick connection on the crossover that is the cause. Open the bleeder valve that is next to the radiator cap. this is located under the plastic cover on top of the reservoir on the boxster and next to the cap on the 996. to open it lift up on the wire pull and rotate it 90 degrees so that it is in the upright position. begin filling the system with fresh porsche factory antifreeze to a 50 50 rate. Coolant antifreeze (pink g40, prediluted, 1 gallon) part #: 861399 m1364. $ 23.25. qty: click to verify fitment with your car. 996 targa targa (2002) 996 carrera, carrera 4 and carrera 4s (1999 05) 996 turbo and turbo s coupe (2001 05) 996 gt2 and gt3 coupe (2002 05).
Does Someone Have A List Of All The 996 Coolant Hoses Rennlist Open the bleeder valve that is next to the radiator cap. this is located under the plastic cover on top of the reservoir on the boxster and next to the cap on the 996. to open it lift up on the wire pull and rotate it 90 degrees so that it is in the upright position. begin filling the system with fresh porsche factory antifreeze to a 50 50 rate. Coolant antifreeze (pink g40, prediluted, 1 gallon) part #: 861399 m1364. $ 23.25. qty: click to verify fitment with your car. 996 targa targa (2002) 996 carrera, carrera 4 and carrera 4s (1999 05) 996 turbo and turbo s coupe (2001 05) 996 gt2 and gt3 coupe (2002 05). If i am working on the rear part coolant system i always get the car as high as possible at the rear to make sure i don't loose all the coolant and less chance of air in the system, same procedure with the front but when re filling i always get the car as high as possible at the rear as this allows as much air as possible to escape. Please note: the redesigned coolant cap is part: part #: 996 106 447 04 m100 check out our complete technical article directory for guides to many other procedures. check out our basic maintenance section, which has all the parts you'll need to get your vehicle running its best, including filters, fluids, brakes, spark plugs, lighting, and more.
Porsche 996 911 Coolant Reservoir Replacement Diy Porsche Carrera 3 4l If i am working on the rear part coolant system i always get the car as high as possible at the rear to make sure i don't loose all the coolant and less chance of air in the system, same procedure with the front but when re filling i always get the car as high as possible at the rear as this allows as much air as possible to escape. Please note: the redesigned coolant cap is part: part #: 996 106 447 04 m100 check out our complete technical article directory for guides to many other procedures. check out our basic maintenance section, which has all the parts you'll need to get your vehicle running its best, including filters, fluids, brakes, spark plugs, lighting, and more.
Part 2 Of 4 Porsche 996 Turbo Coolant Pipe Pinning And Fittings
Comments are closed.