Nest Thermostat Replacement Guide The nest app will guide you through thermostat installation, but here are some more detailed instructions to walk you through everything you need to do to install your nest thermostat on the wall. note : these illustrations use the 3rd gen nest learning thermostat, but the steps are the same for the nest thermostat e. Nest thermostats don’t have a touch screen. use the touch bar on the right side to control your thermostat. swipe up to raise the temperature, swipe down to lower it, and tap to confirm. the display will show you how many minutes until your desired temperature is reached. tap the touch bar to bring up the menu.
Nest Thermostat Replacement Guide Tap add product. select nest thermostat. scan the code on the bottom of your thermostat stand to get started. the app will take you through setup and show you a wiring diagram so that you can see where to plug in your wires. follow the instructions in the app carefully to install your nest thermostat e. 8. install the nest thermostat. install it on a wall using the included power cord, plug and clips instructions for installing the stand for nest learning thermostat (sold separately) come with the stand. before attaching the base to the wall, check to make sure the thermostat is within range of the heat link. Al. screwsoptional. steel plate screws1. switch off powerthis protects you and a. oids blowing a fuse in your equipment. adjust the temperature on your old ther. yo. r system is off. reaker boxswitch3. check your systemif your old thermostat is labeled 120v or 240v or has thick wires with. ire nuts,. Tap next. the app will look for any devices, and if it doesn’t automatically find the thermostat, it will ask you to select your product from a list. tap nest thermostat from this list and scan.
Nest Thermostat Replacement Guide Al. screwsoptional. steel plate screws1. switch off powerthis protects you and a. oids blowing a fuse in your equipment. adjust the temperature on your old ther. yo. r system is off. reaker boxswitch3. check your systemif your old thermostat is labeled 120v or 240v or has thick wires with. ire nuts,. Tap next. the app will look for any devices, and if it doesn’t automatically find the thermostat, it will ask you to select your product from a list. tap nest thermostat from this list and scan. Carefully remove the wires leading from the wall into the thermostat, and then unscrew the device from the wall. 4. mark the position of the nest. thread the wires through the center of the nest. Insert the screws into the long slots on the steel plate. use the other two short screws to attach the nest base and trim plate to the steel plate. attach the nest base. pull the wires through the center of the base, then attach it to the wall with the screws. connect wires.
Nest Thermostat Replacement Guide Carefully remove the wires leading from the wall into the thermostat, and then unscrew the device from the wall. 4. mark the position of the nest. thread the wires through the center of the nest. Insert the screws into the long slots on the steel plate. use the other two short screws to attach the nest base and trim plate to the steel plate. attach the nest base. pull the wires through the center of the base, then attach it to the wall with the screws. connect wires.
Comments are closed.