Instructions For Limb Holder Cuff Lh 133a Youtube Here's the instructions on how to use the limbholder cuff sold by belpro medical. Limb holder lh 133a. model: lh 133a. features. brushed nylon laminated on polyurethane foam; 2 strap of 40″ limb holder lh 133qra. lh 133qra. need expert advice?.
Limb Holder Lh 133a Belpro Wrap the limb holder cuff around the patient’s wrist so the buckle and connecting strap is on the ulnar side of the wrist (opposite the thumb) (fig. 1). 3. secure the hook and loop fastener. slide one finger (flat) between the cuff and the inside of the patient’s wrist to ensure proper fit (fig. 2). the strap must be snug, but not. Application instructions: 1) wrap the blue foam cuff pad around the limb in a clockwise direction, with the blue foam toward the skin and so that the metal ring is positioned next to the wrist bone. you should be able to easily insert one finger between the device and the patient’s limb. 2) make a 1 in. (3 cm) loop with the strap near the. The limb holder restricts mouvements of patient preventing removal of medical devices or injuries . double padded cuff made of soft breathable foam for patient comfort. hook velcro closure for better adjustment with two models of buckles at wrist: double strap with qr 2 pieces. Posey limb holders. ref 2631 cotton flannel lined. nge of motion for legs:attach the cuf that is secured to the bottom right side of the. ame to the left ankle.crisscross the straps and attach the cuf secured to the bottom left side of the f. necessaryprecautionsavoid using on a patient with a dislocation or fracture on the restrained limb, or.
Belpro Medical Lh 133a Limb Holder With 2 Piece Quick Release Buckle The limb holder restricts mouvements of patient preventing removal of medical devices or injuries . double padded cuff made of soft breathable foam for patient comfort. hook velcro closure for better adjustment with two models of buckles at wrist: double strap with qr 2 pieces. Posey limb holders. ref 2631 cotton flannel lined. nge of motion for legs:attach the cuf that is secured to the bottom right side of the. ame to the left ankle.crisscross the straps and attach the cuf secured to the bottom left side of the f. necessaryprecautionsavoid using on a patient with a dislocation or fracture on the restrained limb, or. 1. place the cuffs at wrist or ankle position. 2. bring the ends of the strap down through the inside of the side rails so they. do not interfere when the side rails are raised. thread the end of the strap. over the top, around the frame, and through the lock. make sure that the straps are attached to the frame that. Application instructions: single cuffs 1.signs of the patient. wrap the cuff around the patient’s limb, leaving enough room to insert one finger, bringing the u bar through the vertical slot and then the leather tongue through the u bar. 2. pass the connecting strap through the u bar on the cuff.
Limb Holder Belpro 1. place the cuffs at wrist or ankle position. 2. bring the ends of the strap down through the inside of the side rails so they. do not interfere when the side rails are raised. thread the end of the strap. over the top, around the frame, and through the lock. make sure that the straps are attached to the frame that. Application instructions: single cuffs 1.signs of the patient. wrap the cuff around the patient’s limb, leaving enough room to insert one finger, bringing the u bar through the vertical slot and then the leather tongue through the u bar. 2. pass the connecting strap through the u bar on the cuff.
Comments are closed.