How To Use An Automotive Test Light Quick And Easy Youtube ** timeline below if you would like to jump to a specific section ** a test light is a simple, quick tool to test for electrical issues in your car. they may. Here is a quick tutorial on how to use an automotive test light circuit tester to test for power. i am demonstrating with a cornwell 6v 12v light.
How To Use An Automotive Test Light Circuit Tester Youtube An automotive test light is a very handy tool to help diagnose electrical issues on many different things. a test light can help you to narrow down and pinpo. The light should light when connected as shown with the a c clutch fuse removed. first, find the hot terminal by connecting the test light clip to ground. then move the test light clip to b 12v and test the opposite side of the fuse. it should show a ground coming back through the load. This is easily done by connecting the test light lead to the negative side of the battery and then touching the point of the probe to the positive side battery terminal, the test light should light up. a popular use of a test light is to check for power and the condition of the fuses in the fuse panel or power distribution center (pdc), this. Connect the clamp side of the test light to the battery positive (positive power source). connect the other end to the wire (or circuit) in question. when the test light illuminates, it means there is a short to ground. be sure it is the correct circuit you are testing. the circuit may be grounded for a reason.
Comments are closed.