How To Sand Hardwood Floors With An Easy Steps Step 1: sand the center of the floor. with the room prepped, you’re ready to sand. use a random orbit sander for flat floors. it’s easier to handle, and the random sanding pattern won’t leave directional scratches on the floor. floors that are cupped and wavy require a drum sander. A step by step video for a home owner on how to use various wood floor sanders, and how to apply the finish.
How To Sand And Refinish Wood Floors Apply the finish with a lamb’s wool applicator in smooth, even lines. avoid drips. consider three coats of oil based finish or four coats of water based finish. when each coat dries, sand the floor lightly with 220 grit paper or #000 steel wool. many finishes take 24 hours to dry. vacuum up the dust and apply the subsequent coat. Sanding your floors properly is one of the most critical steps involved in refinishing hardwood floors. this is because it removes the old stain and turns your entire floor into a blank slate. 2. For the first stage of sanding, you can move at a 7 to 15 degree angle to the direction of the boards. this will help level slight variations in the floor. it also minimizes the chance of "dish out" or "waves," when a loose or uneven floor gets sanded more in some spots than others. 8. move constantly as you sand. Using a 4 inch brush, apply the coat on 3 to 6 boards at a time. move on to the next group once you’re done, and then the next, until the whole floor is covered. to ensure the coat is applied evenly, you’ll have to rely on a portable floodlight. one that can light up the floor at a shallow angle. 6.
Comments are closed.