How To Reset Oil Light Steps For Common Car Makes Press “set clr” and select “yes” to reset the oil light. when you push the “set clr” button on the center console, the dashboard should display a message asking you if you want to reset the oil life. just use the arrow keys to select “yes.”. your oil life should be set back to 100%!. Locate the “select” stem near the speedometer and press it until you see the word “oil” or a wrench icon appear. press and hold the stem for 10 seconds, or until the icon begins flashing. release the stem and hold “select” again for five more seconds. the oil change light should disappear until the next time a change is due.
How To Reset The Oil Change Light In A Car Diy Family Handyman Press the navigation dial to enter the settings menu. use the navigation dial to scroll through the settings until you see the word “maintenance.”. press the dial to enter the maintenance menu. scroll down to “oil and filter,” then press the navigation dial. robert maxwell for family handyman. step 4. Scroll to the correct screen to find the oil change reminder. locate the reset or info button on your instrument cluster. this might be on the steering wheel, light or wiper controls, or the dashboard. press and hold the reset button until the oil life percentage or light starts blinking. release the button, then press and hold it again until. Press and hold the reset button. turn the ignition back to the on position while holding the reset button. watch the oil change or maintenance light carefully. it should start to blink. allow the light to blink on and off for a few seconds, then release the reset button and turn the ignition off. steve maxwell for family handyman. Watch your dashboard as the engine comes alive. at this point, the oil change light should have disappeared, a surefire sign of a successful reset. if the oil change light is no longer visible, you’ve successfully turned off the oil light, aligning your vehicle’s electronic readings with its physical state. 9. regularly check oil life.
How To Reset The Change Oil Light In Your Car Press and hold the reset button. turn the ignition back to the on position while holding the reset button. watch the oil change or maintenance light carefully. it should start to blink. allow the light to blink on and off for a few seconds, then release the reset button and turn the ignition off. steve maxwell for family handyman. Watch your dashboard as the engine comes alive. at this point, the oil change light should have disappeared, a surefire sign of a successful reset. if the oil change light is no longer visible, you’ve successfully turned off the oil light, aligning your vehicle’s electronic readings with its physical state. 9. regularly check oil life. Find and hold the “select reset” button down for ten seconds. watch for the oil change light to start blinking. when it starts blinking, release the button then press it back down for another 10 seconds until it reads 100%. for some displays you may need to select the “info” button to enter reset mode. Step 4: turn off the engine and check the oil level. to begin, turn off the engine and wait a few minutes for the oil to settle. next, open the hood and locate the dipstick. pull out the dipstick and wipe it clean with a rag. reinsert the dipstick and then pull it out again to check the oil level.
How To Reset The Oil Change Light In Your Car Family Handyman Find and hold the “select reset” button down for ten seconds. watch for the oil change light to start blinking. when it starts blinking, release the button then press it back down for another 10 seconds until it reads 100%. for some displays you may need to select the “info” button to enter reset mode. Step 4: turn off the engine and check the oil level. to begin, turn off the engine and wait a few minutes for the oil to settle. next, open the hood and locate the dipstick. pull out the dipstick and wipe it clean with a rag. reinsert the dipstick and then pull it out again to check the oil level.
How To Reset The Change Oil Light In Your Car
Comments are closed.