How To Install A Brasscraftв Hose Barb And Garden Hose Fittin Learn how to install a hose barb and garden hose fitting.for more information about brasscraft products, please visit our website at brasscraft.co. In this video we will demonstrate how to install barbed hose fittings.hose used in this video: innehagen.no product page fleksibel slange 16mmfit.
How To Install A Brasscraftв Compression Fitting Youtube 3. push the fitting into the tubing by wiggling it into place. stick the tip of the barbed fitting into the open end of the tubing that you just heated up. wiggle the fitting using back and forth and up and down motions, while simultaneously pushing hard, until it’s all the way inside the tubing. The barb should contract to a slightly smaller size as it freezes; the heated tubing should be slightly larger in diameter and more pliable with heating. both should give you a better shot. by the way, do not freeze with liquid nitrogen. Installation. to install a hose barb fitting, push the barbed end into the end of a hose. the barbs on the fitting make the connection tight and secure because they grip the inside of the hose. use a clamp to secure the hose over the barb. this helps prevent the hose from coming off the fitting under pressure or with movement. 4. push the end of the hose onto the fitting. the majority of hose fittings are made with a slightly narrower end that fits inside your hose. this end is called the barb. place the barb in the opening of the hose and push down firmly until the hose is seated all the way against the rim of the fitting.
Comments are closed.