How To Change Lawn Mower Blade Step By Step Guide In this video, i will show you how to easily change the blade on your lawnmower. whether you're a seasoned gardener or a beginner, changing the blade on your. Use the socket wrench to loosen and remove the nut or bolt attaching the old blade to the spindle. once the nut or bolt is removed, carefully slide the old blade off the spindle and place it aside. take this opportunity to inspect the blade for any signs of damage or wear. if necessary, sharpen or replace the blade.
How To Change Lawn Mower Blade Step By Step Guide 4. refill the gas tank and do a pre check before mowing. check the air filter to be sure that oil did not saturate the foam filter, if necessary, and reattach the spark plug wire. after a quick inspection, you should be able to start up your mower and start cutting that grass much more efficiently with your new blades. To change the blade on a lawn mower, first, make sure the mower is turned off and remove the spark plug. use a wrench to loosen and remove the bolt holding the blade in place. carefully lift the old blade off and replace it with a new one. make sure the blade is aligned correctly and tighten the bolt securely. Step 1: preparing the mower. disconnect the spark plug: locate the spark plug on your mower’s engine and disconnect the wire. turn the mower upside down: place the mower on a sturdy surface with the deck facing upwards. if available, use a support stand to elevate the deck. remove the blade cover: depending on your mower model, the blade. First, make sure the mower is turned off and the spark plug is disconnected to prevent any accidents. then, using a wrench or socket set, remove the bolt that holds the blade in place. once the bolt is removed, carefully lift off the old blade and replace it with a new one, making sure it is aligned correctly.
How To Easily Change A Lawnmower Blade Step By Step Guide Youtube Step 1: preparing the mower. disconnect the spark plug: locate the spark plug on your mower’s engine and disconnect the wire. turn the mower upside down: place the mower on a sturdy surface with the deck facing upwards. if available, use a support stand to elevate the deck. remove the blade cover: depending on your mower model, the blade. First, make sure the mower is turned off and the spark plug is disconnected to prevent any accidents. then, using a wrench or socket set, remove the bolt that holds the blade in place. once the bolt is removed, carefully lift off the old blade and replace it with a new one, making sure it is aligned correctly. Step 4: tighten the bolt in a clockwise direction. using a socket wrench, tighten the bolt in a clockwise direction until it is snug. be careful not to over tighten the bolt, as this can damage the lawnmower. once the bolt is tightened, double check to make sure that the blade is securely in place. Wedge a block of wood between the mower blade and the deck to keep the blade from turning when you tighten the blade bolt. tighten the blade bolt to 500 in. lbs. using a torque wrench. remove the wood block. release the mower handle from the worktable and lower the mower to the upright position. remove the plastic bag from the fuel tank.
How To Replace The Blade On A Lawn Mower Youtube Step 4: tighten the bolt in a clockwise direction. using a socket wrench, tighten the bolt in a clockwise direction until it is snug. be careful not to over tighten the bolt, as this can damage the lawnmower. once the bolt is tightened, double check to make sure that the blade is securely in place. Wedge a block of wood between the mower blade and the deck to keep the blade from turning when you tighten the blade bolt. tighten the blade bolt to 500 in. lbs. using a torque wrench. remove the wood block. release the mower handle from the worktable and lower the mower to the upright position. remove the plastic bag from the fuel tank.
Comments are closed.