How To Clean Vinyl Records Easy Guide For Beginners 6. wipe the vinyl with a dry cloth and let it air dry for 30 minutes. use a clean, microfiber cloth to dry the record. then, leave the record on the cleaning mat to completely dry for at least 30 minutes. or, set it on a dish rack. Use a spray bottle to apply the solution evenly onto the record, avoiding the label area. using a vinyl specific cleaning solution is crucial to without damaging your records. dampened with distilled water and wipe the record in a circular motion, following the grooves. this will lift any embedded dirt or grime without scratching the surface.
How To Clean Vinyl Records Easy Guide For Beginners Insert the cleaning brushes, and place the rollers at the correct position for the size of the record (12 inches, 10 inches, or 7 inches) you’re planning to clean. fill the tank to the fill line. Lay your vinyl down on a soft, flat surface. on the problem areas you identified, apply a small amount of your chosen cleaning fluid to the area, being extremely careful to avoid the inner label. work in the direction of the grooves with gentle circular motions until the debris is gone. do another quick inspection. Avoid using too much pressure, as this could damage the grooves. next, take a clean microfibre cloth and wipe the record gently in a circular motion. this step helps remove any remaining dirt and reduces static build up, ensuring your vinyl is thoroughly clean and ready for play. 2. inspect the record. Lightly wipe the vinyl with a clean microfiber cloth in a circular motion a couple of times. then wipe from the center label to the edge to dry the vinyl. repeat steps 2 5 if necessary. flip the vinyl record and repeat 2 4 for the b side. allow the record to dry fully before storing or playing.
Comments are closed.