How To Change Hardwood Floor Color In 3 Quick Steps If you want the color to be darker, you can apply more than one coat of stain. 3. seal the floor. lastly, you will need to seal the floor with two to three coats of polyurethane. to begin, remove any lint and particles on the floor with a microfiber cloth. next, you apply the polyurethane finish with a natural bristle brush in smooth strokes. To change hardwood floor color, pick a polyurethane water based stain color you like and make sure it’s good for your type of floor. use a simple foam pad to spread the stain along the wood’s lines. 3 ways to change hardwood floor color. changing the color of my hardwood floors seemed like a big project at first.
How To Change Hardwood Floor Color 3 Quick Steps To Fol 197. the answer is usually yes! many homeowners don’t realize that you can change the color of hardwood flooring when you refinish your floors. yes, it’s true…you can go light or dark or red tones or anywhere in between. most are pleasantly surprised it doesn’t matter if you are going light to dark or vice versa. Step 3. applying stain. once you’ve prepped your hardwood floors, apply the stain of your choice using either a brush or cloth and work in sections until all your floor is covered in an even coat. allow each section to dry before moving on to another. if you need to, add additional coats for darker looking flooring. step 4. finishing up. Step 1: preparing the floors for hardwood floor refinishing. before diving into the gel staining process, we need to first prepare the floors. we want to make sure the gel stain adheres properly and that the flooring looks its best when we’re finished. therefore, our first steps include: removing items off the floors. 2. choose a stain or paint. once you have decided on the new color, you must choose between a stain and paint. a stain is the best option if you are looking for a more natural look. however, if you want to change the look of your floors, painting them completely is the way to go. 3.
How To Change Hardwood Floor Color 3 Quick Steps To Fol Step 1: preparing the floors for hardwood floor refinishing. before diving into the gel staining process, we need to first prepare the floors. we want to make sure the gel stain adheres properly and that the flooring looks its best when we’re finished. therefore, our first steps include: removing items off the floors. 2. choose a stain or paint. once you have decided on the new color, you must choose between a stain and paint. a stain is the best option if you are looking for a more natural look. however, if you want to change the look of your floors, painting them completely is the way to go. 3. Apply your stain in thin, even coats along the wood grain with a foam applicator pad. remove any excess stain and let the wood dry completely. if necessary, apply a second coat of wood stain. Prep the room. first, remove all furniture from the room. then pull the quarter round from the baseboard so you’ll be able to sand right up to the baseboard. thoroughly clean the hardwood floors with a vacuum and damp mop the floor. next, seal off the room with plastic sheeting and painter’s tape.
Comments are closed.