E46 M3 Oil Cooler And Ambient Sensor Install Youtube Thanks for watching! please consider subscribing to the channel for new videos, vlogs and everything else that i record and share with you.affiliates: type. Installation of an upgraded csf oil cooler to help increase the cooling capacity of the car. links below for the items mentioned in the video. csf oil cooler.
Bmw E46 M3 Csf Oil Cooler Install Youtube I'm replacing the oil level and temperature sensor along with new oil. all items were purchased on ecs tunning. please like & subscribe and help me reach 1,. That is the first step in my opinion. automatic transmission temp is manageable at speed, but spikes in low speed hot traffic conditions. get an oil temp gauge i think german auto solutions sells an engine oil filter cap, which has threaded fittings for oil temp. study where the s54 oil cooler goes, and how it is plumbed. 3.2, drain all the oil and tighten drain plug back to 18 ft lbs. 4. remove oil level sensor. 4.1, remove the three (3) 10mm nuts on the sensor. 4.2, replace with new gasket ring and sensor. 4.3, torque the three (3) 10mm nuts to 88 in lbs or 10nm or 7.3 ft lbs. 5. fill engine oil. 5.1, follow normal procedure to do oil change including oil. Plumbing: this is a direct fit oil cooler for use with existing oem oil cooler lines and hoses e46 m3 specific. (if you're using this on an s54 swap with csf's s54 swap radiator, we recommend using the e36 euro oil cooler lines see related items below.) size & weight: approximately 27"l x 3"h x 3"d; 9 lbs all csf high performance cooling.
Bmw E46 M3 Install Of An Oil Filter Housing Delete Plate New Oil 3.2, drain all the oil and tighten drain plug back to 18 ft lbs. 4. remove oil level sensor. 4.1, remove the three (3) 10mm nuts on the sensor. 4.2, replace with new gasket ring and sensor. 4.3, torque the three (3) 10mm nuts to 88 in lbs or 10nm or 7.3 ft lbs. 5. fill engine oil. 5.1, follow normal procedure to do oil change including oil. Plumbing: this is a direct fit oil cooler for use with existing oem oil cooler lines and hoses e46 m3 specific. (if you're using this on an s54 swap with csf's s54 swap radiator, we recommend using the e36 euro oil cooler lines see related items below.) size & weight: approximately 27"l x 3"h x 3"d; 9 lbs all csf high performance cooling. Features of the e46 m3 race oil cooler. designed to fit like oem, under oe style radiator connections. 445 cu. inches of volumetric size (4 times larger than the factory cooler) fits under oem underpanels. dual 1 8 npt ports (for measuring input and output of oil flow) included in the kit. This oil cooler design also retains the factory fan shroud, a c fan, a c lines and radiator location and configuration. installation is a snap and the average at home do it yourselfer can install this themselves. features. • 400% increase in core volume.
Comments are closed.