Does Someone Have A List Of All The 996 Coolant Hoses Rennlist Could you please help in providing a link to a coolant hose layout for a 2003 996 carrera 2 3.6. my workshop cd only has the turbo diag for some reason. i am trying to find the source of a coolant leak. it's somewhere at the front of the engine (behind passenger seat rhd uk model) and fairly high. Threads. rennlist porsche discussion forums. porsche technical discussion areas. 996 forum. notices. follow rennlist on facebook for news and forum updates. 996 forum 1999 2005. sponsored by: ln engineering.
Does Someone Have A List Of All The 996 Coolant Hosesођ There is a lot less clearance with the tip, and more coolant hoses to deal with. if you are going in from the top it might be easier. you can also safely lower the engine down an inch to get more clearance by slightly loosening the engine mount bolts from the engine mounts. there is plenty of thread there, but don't loosen them off too much!. I believe the procedure should be the same for all models except for the belly pan removal needed for the s4s. in summary, the procedures includes removal of the bellypans, draining of the engine block, draining of the radiator, coolant mixing and refilling. tools materials i used include: 8mm and 13mm socket,. There are 27 different hoses in the 996 coolant system, any that haven’t been replaced are 20 years old. there are also lots of bad experiences with non oem expansion tanks. water pumps are also frequently suspect, some recommend changing them @ 60k miles. there is a r 996 that has some good contributors and rennlist is a must read. Copied from boxster section, applicable to 996:the replacement of the radiator hoses is not a bad idea. while we have discussed the coolant and other issues the hoses have always been left alone. the deterioration of the radiator hoses will differ on the climatic conditions that the car is used in.
Does Someone Have A List Of All The 996 Coolant Hosesођ There are 27 different hoses in the 996 coolant system, any that haven’t been replaced are 20 years old. there are also lots of bad experiences with non oem expansion tanks. water pumps are also frequently suspect, some recommend changing them @ 60k miles. there is a r 996 that has some good contributors and rennlist is a must read. Copied from boxster section, applicable to 996:the replacement of the radiator hoses is not a bad idea. while we have discussed the coolant and other issues the hoses have always been left alone. the deterioration of the radiator hoses will differ on the climatic conditions that the car is used in. Is there a consolidated list of hoses and clamp part numbers and location description i.e; lower left water pump engine by year that a dyi guy could order from. maybe a kit that provides all 28 hoses or engine hoses and front radiator hoses. the schematic and no part numbers by year from porsche make this very frustrating. thank you. Across the board, it is advised to replace the rubber coolant hoses in the porsche 996 with stainless steel hoses. in addition, look over of have your mechanic look over your engine for any other parts that may have degraded or worn out with age. check all of the rubber on the intake system. check the clutch, gasket, and o rings.
Does Someone Have A List Of All The 996 Coolant Hosesођ Is there a consolidated list of hoses and clamp part numbers and location description i.e; lower left water pump engine by year that a dyi guy could order from. maybe a kit that provides all 28 hoses or engine hoses and front radiator hoses. the schematic and no part numbers by year from porsche make this very frustrating. thank you. Across the board, it is advised to replace the rubber coolant hoses in the porsche 996 with stainless steel hoses. in addition, look over of have your mechanic look over your engine for any other parts that may have degraded or worn out with age. check all of the rubber on the intake system. check the clutch, gasket, and o rings.
Comments are closed.