Bmw Service Light Reset How To And Information Youtube Release the button, and press and hold it again until the message says “reset?”. release the button again, and press and hold it. the message will say, “reset in progress”. continue to press and hold the button until the message says, “reset successful.”. turn the car off and then start it to make sure the light was successfully reset. Step 4: reset the light. with the brake fluid light highlighted, press and hold the back button on the left side until the light starts flashing. when you see it flashing, press the forward button once to confirm resetting it. the light should now be reset to the off position until the next fluid replacement interval.
How To Reset Bmw Service Light Youtube Release the button again. press and hold the button for a third time. the message will say, “reset in progress.”. continue to press and hold the button until the message says, “reset successful.”. turn the car completely off. start your engine to make sure the light was successfully reset. Newer models from around 2019 up don't have a button on the instrument cluster to reset the light. this is how it's done without a machine. note if you ar. Want to reset the service indicator on your bmw? this is how it is done, and although this was performed on a bmw e64 650i the same procedure works for many. Release the odometer button after the service message comes on. press the button (without holding it down) until the menu comes to the warning light that you want to reset, whether that be the brake fluid light, oil service light, or any other warning light. follow steps 4 and 5 from the instructions above, and repeat until all relevant warning.
Comments are closed.