8 Steps How To Change A Flat Tire Motor Hills Take the tire off by gripping the rim or the tire itself. you want to pull straight towards you without letting it fall and hit the threaded rods going through the rim. when the flat tire is removed, set it on the ground next to you, out of the way. you’ll need this for later. Place the jack under the vehicle, positioning it near the flat tire according to your car manual’s instructions. pump or crank the jack to lift the tire off the ground. 5. remove the flat tire. once the tire is lifted, remove the lug nuts entirely and gently pull the tire toward you until it’s free from the hub. 6.
How To Change A Flat Tire In 8 Steps Scott S Auto Repair Fort 5. remove the flat tire. with the car raised, finish loosening the lug nuts and place them in a convenient spot nearby. (think somewhere where they won't get in the way but where they won't get. Inflate car tire and check for leaks again. after plugging the car, take it down from the jack stands and slowly jack it back to the ground. with the car back on the ground, take a look at the flat tire again. you’ll want to break out that soapy water mix you had in the spray bottle earlier. Then use your lug wrench to fully remove the nuts. after that, pop off the wheel, then slap the spare tire on, placing the wheel with the flat next to the jack where the spare used to be; safety. Hand tighten the lug nuts. now be careful not to damage the wheel stud threads. this could cause lug nuts not to see it properly and the wheel could come off the vehicle. third, lower the car until the tire just touches the ground. fourth, tighten the lug nuts firmly in a star pattern. once the lug nuts have been tightened, lower the vehicle.
How Change Flat Tire Infographic Image Photo Bigstock Then use your lug wrench to fully remove the nuts. after that, pop off the wheel, then slap the spare tire on, placing the wheel with the flat next to the jack where the spare used to be; safety. Hand tighten the lug nuts. now be careful not to damage the wheel stud threads. this could cause lug nuts not to see it properly and the wheel could come off the vehicle. third, lower the car until the tire just touches the ground. fourth, tighten the lug nuts firmly in a star pattern. once the lug nuts have been tightened, lower the vehicle. Jump to: step 1: park your car. step 2: find the tire changing tools your car came with. step 3: jack it up. step 4: remove the lug nuts. step 5: put the spare tire on. The tools you need to change a tire. everything you need to change a flat should come with your car. in addition to the obvious, a spare tire, you need: a jack. a lug wrench. check your manual for specifics as well as the storage location and how to assemble the jack if necessary. if your car doesn’t include these tools, you’ll need to.
How To Change A Flat Tire National Dispatch Jump to: step 1: park your car. step 2: find the tire changing tools your car came with. step 3: jack it up. step 4: remove the lug nuts. step 5: put the spare tire on. The tools you need to change a tire. everything you need to change a flat should come with your car. in addition to the obvious, a spare tire, you need: a jack. a lug wrench. check your manual for specifics as well as the storage location and how to assemble the jack if necessary. if your car doesn’t include these tools, you’ll need to.
How To Change A Flat Tire Infographic Vrogue Co
Comments are closed.