2010 Camaro 6 2l Oil Cooler Housing Is Leaking The Parts Manual Shows I finally got around to fixing my oil leak in my 2010 2ss 6.2 liter camaro. it only cost about $25 in parts from the chevy dealer and then you need to buy oil (and filter if needed) and anti freeze from your parts store. the job should only take you about 1 and a half hours max and it is very easy. Customer: 2010 camaro 6.2l, oil cooler housing is leaking. the parts manual shows 4 o rings inside the housing. can these be replaced as a fix? if so, what is are the torque specs for reassembly of the housing? thanks.
2010 2011 Es Engine Oil Cooler Lines Ls3 6 2w L99 6 2j Diagram Parts link: wholesalegmpartsonline showassembly.aspx?ukey product=2669835&ukey assembly=1276955&ukey make=0&ukey model=0&ukey driveline=0&ukey. Mar 2, 2020. #1. i've been chasing an oil leak from the oil cooler block off plate on my yukon's 6.2l ls based engine. i'm now on my second replacement gasket and it has started seeping again clearly between the block off plate and the oil pan. the first repair lasted about a year i used a thin bead of rtv that time. 08 21 2010, 05:51 pm. # 1. luis nunez. drives: 2010 camaro ss. join date: jun 2010. location: puerto rico. posts: 67. oil leak from oil cooler. when i did the oil change i notice oil close to the filter, i cleaned the area and changed the oil, recently i decided to take a look and notice oil again. From there, the oil cooler gaskets went south, which happened at 6k. after that, the oil pan gasket started leaking at around 9k. the solution per the tsb was to replace the oil pan itself and the gasket. apparently early oil pans had some sort of problem according to the service manager. they had to drop the entire front rack to make this repair.
Comments are closed.