Tatting For The Complete Beginner Part 1 Materials Knots Youtube Part 1 of a tatting series for the very, very, very beginner. i'll show you the materials you need, how to wind a shuttle, and how to make the very basic ta. Tatting for the complete beginner, materials & knots, #1 | how to make a shuttle loop and join themtopic covered in this video :1. shuttle2. tatting3, ba.
Tatting For The Complete Beginner Materials Knots 1 How To Make Tatting is such a great take with me project. it is so small that i can keep the whole project in my purse in a ziploc bag. i can pull it out whenever i am stuck in a waiting room. tatting is a process of making lace by tying half hitch knots in thread to form small connected rings. my grandmother (1908 2000) learned to tat as a child in germany. Insert the thread through the hole and pull it out by a couple of inches (about 5cm) on the other side. then, place one finger over the hole to hold the thread in place. [2] 2. wrap the thread around the center of the shuttle. with your finger still on the thread, begin to wind the thread around the spool. And thus the ball of thread will move to the right of the work. therefore, the work needs to be turned over and each thread will take its place. and if you make two knots, the threads will remain in the same position and there is no need to turn the work over. so, the golden rule: one knot – turn, two knots – no turn!. Tatting for beginners, base knot. the main tatting technique is a double stitch. please watch the video and choose the method you like. i did a demonstration.
Comments are closed.