Microcontroller Pic16f877 Video 45 How To Display Temperature ођ Analog to digital converter devicesanalog to digital converters are among the most widely used devices for data convert. digital computers use binary values,. Interfacing pic16f877a with lm35 sensor circuit: the output of the lm35 temperature sensor is connected to analog channel 0 (an0) of the pic16f877a. in this example the microcontroller runs with crystal oscillator @ 8mhz. interfacing pic16f877a with lm35 temperature sensor c code: the c code below was tested with ccs pic c compiler version 5.051.
Temperature Sensor Using Pic16f877a Microcontroller Lm35 temperature sensor. the lm35 is a temperature sensor widely used in electronic projects and midrange devices. it has limited usage in industrial applications due to maximum temperature range limitations. it’s rated to a full range of −55°c to 150°c. you can just power it up and instantly read the voltage level on the output terminal. To program the pic16f877a microcontroller, we require a pickit 3 programmer. this programmer is compatible with the mplab integrated programmer environment (ipe) and allows for easy programming of the microcontroller. 3. lcd 16×2 display. a 16×2 lcd display is used to show the temperature readings. Temperature sensor using pic16f877a microcontroller. in this tutorial, we are making a digital thermometer using pic microcontroller and lm35 temperature sensor. in this project, we will sense the temperature using lm35 and display it on 16×2 lcd. lm35 temperature sensor is accurate and cheaper and doesn’t require any external calibration. The compiler used in this project is mikroc pro for pic. the lm35 temperature sensor is three pin device (vcc, out and gnd) with an output voltage linearly related to centigrade temperature (analog device). since the lm35 output varies with dependent to the temperature we need an adc (analog to digital converter) module to measure this voltage.
Comments are closed.